Product Catalog

  • Model Number: D90KA

This ultra compact, ultra quiet 90cfm compressor will efficiently power a single 90 pound breaker or 60 pound rock drill. Powered by a 3 cylinder Kubota diesel engine makes this unit reliable and fuel efficent. The Rotair D90KA offers cost savings over the larger 185 cfm units when only one air tool is needed.

  • Model Number: D185T4i

The "Go to" air compressor in the rental industry. Designed by rental profesionals in the USA to meet the toughest demainds of rental service. Easily powers two 90 pound breakers or two 60 pound rock drills. Powered by a 4 cylinder Kubota engine means efficient and reliable operation. The Rotair D185T4i is one of the quietest units in its class.

  • Model Number: ST8212HLOD-B-120

This heavy duty unit can haul mulch, dirt, gravel, sand, refuse, equipment, pretty much anything you can think of and the low profile design makes loading and unloading safe and easy.

  • Model Number: Quick Attach MBB48

The Mini Brush Buster™ Brush Mower by Quick Attach® has been engineered for durability, safety, and ease of operation. The cutaway design easily cuts brush up to 2" in diameter. Pressure relief valve ensures long life and prevents damage to the hydraulic motor. Dual edge cutting blades reduce maintenance costs. Industrial built 7 gauge design makes it one of the strongest, most versatile brush mowers made. It cuts brush, weeds, and grass.

 

  • Manufacturer: Crain Tools
  • Model Number: 775

The extended spindle, low profile cutting head, and flush-mounted blade of this saw allow it to cut all the way against the inner wall of a toe-kick for removing old underlayment. Saves time and serious hard work!

  • Manufacturer: Atlas Copco
  • Model Number: QLT M10P

This light tower is powered by a Yanmar engine and uses the market-standard metal halide lamp. It has the possibility to power up small electrical tools through its optional sockets, this while providing the needed lighting to different work sites enabling continuous productivity.

  • Model Number: HB-1430

Key Features

  • Working height up to 20 ft
  • Weighs only 1650 lbs
  • Weight allows machine to go on delicate flooring
  • Lifts 670 lbs
  • Slide-out deck extension, with slip-resistant surface

Standard Features

  • Proportional controls
  • Full-Swing entrance door
  • Tilt alarm
  • Hour meter / low voltage indicator

Options

  • Power to the Platform

  • Manufacturer: Sullivan-Palatek
  • Model Number: D185PJD

The 185P compressor is built with the contractor in mind. The larger 185 P compressor has two full length tool boxes, two large service doors, galvanized inner fenders and has Galveneal coating and powder coated sheet metal for rust and scratch protection, plus a cooler cleaning access panel. Powered by a 49 hp John Deere diesel engine, this design has two stage air filters and large 29 gallon fuel tank for full shift duties.

  • Manufacturer: Bobcat
  • Model Number: ComboBucket

This four-in-one attachment can be used as a bucket for loading, carrying and dumping; as a grapple for handling odd-shaped objects; or for dozing, leveling and spreading material with the clamshell open.

  • Manufacturer: David White
  • Model Number: LT8-300

David White is a leading provider of precision equipment for the surveying, construction and civil engineering markets. David White has a well deserved reputation for designing and manufacturing full-featured and affordable surveying instruments and tools. David White transit levels are well known for their advanced features, accuracy and reliability. If you're looking for top quality tools you can't go wrong with David White as they manufacture some of the highest quality construction and surveying transits that are available on the market today. David White transits are used on job sites every day around the world because they consistently produce the accurate and reliable results that engineers demand.

  • Manufacturer: David White
  • Model Number: AL8-22

David White is a leading provider of precision equipment for the surveying, construction and civil engineering markets. David White has a well deserved reputation for designing and manufacturing full-featured and affordable surveying instruments and tools. David White automatic levels are well known for their advanced features, accuracy and reliability. Some of their features and advantages include wire-hung magnetically dampened compensators for superior leveling accuracy, precision controls, sighting scopes, lock-out functionality, bubble vials, infinite tangent screws, and rugged construction that allows them to safely weather the elements. If you're looking for top quality tools you can't go wrong with David White as they manufacture some of the highest quality auto levels that are available on the market today. David White auto-levels are used on job sites every day around the world because they consistently produce the accurate and reliable results that engineers demand.

  • Manufacturer: CST Berger
  • Model Number: LMH-C

No more fussing with manual leveling screws or bubbles; just turn it on and you are ready for work! The LaserMark® LMH is conveniently paired with our top-of-the-line LD400 Universal Laser Detector and heavy-duty rod clamp, built with all the rugged details and valuable features you need.

  • Fully electronic Servo motor-driven horizontal self-leveling 
  • “Anti-Drift System” prevents error by LED indication and by shutting off the laser when the unit’s H.I. is disturbed 
  • LED power, low battery, and Anti-Drift System indicators 
  • One person, water- and dust-proof operation

  • Model Number: Felker TS-40

Cutting floor tiles should not be a hard job if your using the Felker TS-40 Rubi Tile Cutter. It is a professional tile cutter that features a built in separator that cuts maximum length of 17 inches. Its arrangement steel designed to reinforced maximum durability and rigidity.

  • Manufacturer: Husqvarna
  • Model Number: TS-250x

The contractor's choice for production sawing and the chosen preference for the rental market, the Husqvarna Tilematic TS 250x delivers more power with its high torque 1-1/2 hp motor. Rip cut up to 24" tiles or diagonally cut up to 18" tiles. Strength and durability are provided by the stainless steel sliding water pan. 

  • Manufacturer: Cherry Hill Mfg.
  • Model Number: US-Pro 146-c

Renting Floor Sanding Equipment Has Never Been Easier
Sanding floor machines can be bulky, balky, and damage hardwood floor finishes if used incorrectly. U-Sand has taken renting floor sanding equipment to a new level Using four-pad, random orbit technology, the U-Sand Pro sander makes floor sanding easy and worry-free by eliminating the possibility of damaging the floor.
The U-Sand Pro is 40 lbs lighter and offers a more aggressive cut. Acting as a sander, edger and buffer, this machine can complete a flooring job from start to finish.

Three pieces of hardwood floor sanding equipment in one:

  • Floor Sander
  • Floor Edger
  • Floor Buffer

Great in light spaces: Closets, bathrooms, hallways, kitchens, foyers

U-Sand changes everything about floor sanding.

Rip and strip finishes on existing floors with ease. Cuts through urethane efficiently and leaves the wood clean and ready for a new finish. Sands in any direction w&

  • Model Number: Bumpa

The time consuming, back breaking chore of loading repetitive heavy loads roof high becomes quick and easy with a BUMPA loading machine, erected up and running in under 4 minutes. BUMPA's capacity to clear a pallet of concrete blocks in under 1 minute or 1000 tiles in 25 minutes - from single to 3 storey lift - makes it a must for every roofer and builder. Today's regulations state you must provide a mechanical means for handling repetitive heavy loads, rather than relying on manual labour. BUMPA is proven to double your performance for half the effort, helping you to compete and comply!

  • Manufacturer: Werner Ladders
  • Model Number: E7410

The E7410 Extension Trestle 10' Ladders has a 300 pound duty rating per side and is designed for one or two-person jobs. The slip-resistant TRACTION-TRED® extra wide steps are knee-braced and double riveted. A spring-loaded locking mechanism makes maneuvering the extension trestle easy. The nylon-coated guide sleeves assure minimum friction and wear and also increase the ease of operation. External rail shields and the EDGE® bracing system help protect the rails. Fiberglass rails are non-conductive for working near electricity. 

  • Manufacturer: Werner Ladders
  • Model Number: D1520.2

The D1520-2 aluminum extension ladders have a duty rating of 300 pounds and have extra heavy duty I-beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring-loaded locks operate smoothly. Mar-resistant end caps protect the surface ladder is resting against.

  • Manufacturer: Werner Ladders
  • Model Number: D1524-2
The D1524-2 aluminum extension ladder has a duty rating of 300 pounds and has extra heavy duty I-beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring-loaded locks operate smoothly. Mar-resistant end caps protect the surface ladder is resting against.

 

 

  • Manufacturer: Werner Ladders
  • Model Number: D1532-2

The D1532-2 aluminum extension ladders have a duty rating of 300 pounds and have extra heavy duty I-beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring-loaded locks operate smoothly. Mar-resistant end caps protect the surface ladder is resting against.

  • Manufacturer: Werner Ladders
  • Model Number: 560-3

The 560-3 is a 3 section, 60' Aluminum Extension Ladder that has a duty rating of 250 pounds. The exclusive ALFLO® rung joint means TWIST-PROOF® performance. The top fly section can be removed and used separately as a single straight ladder. The bottom base section and intermediate section can be used as a 40' extension ladder. Shoes pivot for use on hard or penetrable surfaces. Rugged spring-loaded locks operate smoothly. Heavy duty rope and double pulley system lift fly and intermediate sections. Rugged spring-loaded locks operate smoothly.

  • Manufacturer: Homelite
  • Model Number: 11dp3

Ideal for muddy water, high solid content.
Handles 1 1/2” solids.
Maximum lift of 20 feet
Powered by a Honda GX160 4HP gasoline engine.
Enclosed gears with oil bath lubrication.

  • Manufacturer: Mi-T-M
  • Model Number: MH-0175-0M10

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles for easy lifting · 10-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug

Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components: Built-in temperature control thermostat with control dial and digital temperature read-out · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-o

  • Manufacturer: Mi-T-M
  • Model Number: MH-0125-0M10

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles for easy lifting · 10-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug

Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components: Built-in temperature control thermostat with control dial and digital temperature read-out · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-o

  • Manufacturer: Mrs. Meyers
  • Model Number: MH-0070-0M10

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank

Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components: Built-in temperature control thermostat with control dial · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel

For use in workshops, garages, construction sites and farms with proper ventilation.