Product Catalog

  • Manufacturer: Barreto
  • Model Number: 922LSH

The Barreto log splitter is the industrial standard with a 790 lb. frame, high carbon wear-alloy wedge, and a 6” x 25 lb. wide flange beam, this splitter is built to endure. The knife plate features high wear nylon pads. Torsion axle suspension reduces bounce and improves tracking and towability when transporting. The cushion mounted log cradle is designed to snap out of the way when using the splitter in the vertical position. A rubber bump stop protects the splitter when transitioning from vertical to horizontal and spring loaded lock bars secure the splitter in place. The engine is mounted on rubber isolators to protect from vibration when towing or operating.

  • Manufacturer: Crain Tools
  • Model Number: 775

The extended spindle, low profile cutting head, and flush-mounted blade of this saw allow it to cut all the way against the inner wall of a toe-kick for removing old underlayment. Saves time and serious hard work!

  • Model Number: HB-1430

Key Features

  • Working height up to 20 ft
  • Weighs only 1650 lbs
  • Weight allows machine to go on delicate flooring
  • Lifts 670 lbs
  • Slide-out deck extension, with slip-resistant surface

Standard Features

  • Proportional controls
  • Full-Swing entrance door
  • Tilt alarm
  • Hour meter / low voltage indicator

Options

  • Power to the Platform

  • Manufacturer: Graco
  • Model Number: RTX 1500

The RTX 1500 is packed with innovative features and performance points – designed for the professional texture contractor.

RotoFlex HD Texture Pump

  • 2.0 gpm (7.5 Lpm) output gets the job done quickly
  • 100 psi (7 bar) material pressure allows longer hose lengths, minimizing time spent moving the sprayer
  • Large, 7/8-in ID pump tube passes large particles easily

Automatic Pressure Unloader

  • Ensures a soft start with each trigger pull
  • Eliminates the material blast that can impact finish quality
  • Results in less material waste and less clean up
  • Dramatically extends pump life

QuikChange Pump Section

  • No-tools pump removal and replacement
  • Changes in less than 5 minutes

High-Output Air Compressor

  • Produces 6.5 cfm @ 45 psi
  • Projects texture farther
  • Maximum 10.2 cfm displacement for long life

Larger-Capacity H

  • Model Number: Felker TS-40

Cutting floor tiles should not be a hard job if your using the Felker TS-40 Rubi Tile Cutter. It is a professional tile cutter that features a built in separator that cuts maximum length of 17 inches. Its arrangement steel designed to reinforced maximum durability and rigidity.

  • Manufacturer: Husqvarna
  • Model Number: TS-250x

The contractor's choice for production sawing and the chosen preference for the rental market, the Husqvarna Tilematic TS 250x delivers more power with its high torque 1-1/2 hp motor. Rip cut up to 24" tiles or diagonally cut up to 18" tiles. Strength and durability are provided by the stainless steel sliding water pan. 

  • Manufacturer: Cherry Hill Mfg.
  • Model Number: US-Pro 146-c

Renting Floor Sanding Equipment Has Never Been Easier
Sanding floor machines can be bulky, balky, and damage hardwood floor finishes if used incorrectly. U-Sand has taken renting floor sanding equipment to a new level Using four-pad, random orbit technology, the U-Sand Pro sander makes floor sanding easy and worry-free by eliminating the possibility of damaging the floor.
The U-Sand Pro is 40 lbs lighter and offers a more aggressive cut. Acting as a sander, edger and buffer, this machine can complete a flooring job from start to finish.

Three pieces of hardwood floor sanding equipment in one:

  • Floor Sander
  • Floor Edger
  • Floor Buffer

Great in light spaces: Closets, bathrooms, hallways, kitchens, foyers

U-Sand changes everything about floor sanding.

Rip and strip finishes on existing floors with ease. Cuts through urethane efficiently and leaves the wood clean and ready for a new finish. Sands in any direction w&

  • Manufacturer: Nobles
  • Model Number: 608681

Pick up spots quickly with the Anser™ portable extractor! It weighs only 18 lbs. With its 2 gallon solution tank and 1.5 gallon recovery tank. 30 psi. 17.5" H x 21" L x 7.75" W. 4" Tool, 8' Hose, 25' Cord.  This portable models' 1.12 hp vacuum motor recovers water efficiently. This versatile extractor is perfect for spot cleaning carpets, auto detailing and upholstery cleaning. Standard attachments include a 4 inch clear hand tool and 8 foot solution vacuum hose. 

  • Manufacturer: Nobles
  • Model Number: 608543

The Power Eagle 716 is packed with lower and versatility, plus it's easy to operate and transport from job to job.The 7 gallon tanks, 16" cleaning path and lightweight design make it perfect for any size facility. This reliable extractor injects cleaning solution into the carpet with its 100 psi pump, while the 1,200 rpm brush loosens soil from the fibers. A powerful 3-stage vacuum with 106" of waterlift quickly removes the soil and solution to leave carpet looking like new. Years of experience in the field have proven that this selfcontained extractor is ready to tackle any carpet cleaning job withsuperior results. Convenient attachments for cleaning upholstery, stairs and hard to reach places are also available.

  • Model Number: Bumpa

The time consuming, back breaking chore of loading repetitive heavy loads roof high becomes quick and easy with a BUMPA loading machine, erected up and running in under 4 minutes. BUMPA's capacity to clear a pallet of concrete blocks in under 1 minute or 1000 tiles in 25 minutes - from single to 3 storey lift - makes it a must for every roofer and builder. Today's regulations state you must provide a mechanical means for handling repetitive heavy loads, rather than relying on manual labour. BUMPA is proven to double your performance for half the effort, helping you to compete and comply!

  • Manufacturer: Werner Ladders
  • Model Number: E7410

The E7410 Extension Trestle 10' Ladders has a 300 pound duty rating per side and is designed for one or two-person jobs. The slip-resistant TRACTION-TRED® extra wide steps are knee-braced and double riveted. A spring-loaded locking mechanism makes maneuvering the extension trestle easy. The nylon-coated guide sleeves assure minimum friction and wear and also increase the ease of operation. External rail shields and the EDGE® bracing system help protect the rails. Fiberglass rails are non-conductive for working near electricity. 

  • Manufacturer: Werner Ladders
  • Model Number: D1520.2

The D1520-2 aluminum extension ladders have a duty rating of 300 pounds and have extra heavy duty I-beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring-loaded locks operate smoothly. Mar-resistant end caps protect the surface ladder is resting against.

  • Manufacturer: Werner Ladders
  • Model Number: D1524-2
The D1524-2 aluminum extension ladder has a duty rating of 300 pounds and has extra heavy duty I-beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring-loaded locks operate smoothly. Mar-resistant end caps protect the surface ladder is resting against.

 

 

  • Manufacturer: Werner Ladders
  • Model Number: D1532-2

The D1532-2 aluminum extension ladders have a duty rating of 300 pounds and have extra heavy duty I-beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring-loaded locks operate smoothly. Mar-resistant end caps protect the surface ladder is resting against.

  • Manufacturer: Werner Ladders
  • Model Number: 560-3

The 560-3 is a 3 section, 60' Aluminum Extension Ladder that has a duty rating of 250 pounds. The exclusive ALFLO® rung joint means TWIST-PROOF® performance. The top fly section can be removed and used separately as a single straight ladder. The bottom base section and intermediate section can be used as a 40' extension ladder. Shoes pivot for use on hard or penetrable surfaces. Rugged spring-loaded locks operate smoothly. Heavy duty rope and double pulley system lift fly and intermediate sections. Rugged spring-loaded locks operate smoothly.

  • Manufacturer: Homelite
  • Model Number: 11dp3

Ideal for muddy water, high solid content.
Handles 1 1/2” solids.
Maximum lift of 20 feet
Powered by a Honda GX160 4HP gasoline engine.
Enclosed gears with oil bath lubrication.

  • Manufacturer: Mi-T-M
  • Model Number: MH-0175-0M10

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles for easy lifting · 10-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug

Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components: Built-in temperature control thermostat with control dial and digital temperature read-out · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-o

  • Manufacturer: Mi-T-M
  • Model Number: MH-0125-0M10

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles for easy lifting · 10-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug

Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components: Built-in temperature control thermostat with control dial and digital temperature read-out · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-o

  • Manufacturer: Mrs. Meyers
  • Model Number: MH-0070-0M10

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank

Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components: Built-in temperature control thermostat with control dial · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel

For use in workshops, garages, construction sites and farms with proper ventilation.

  • SKU: 403975
  • Model Number: AE2240

40', Aluminum, Type IA, Extension Ladder, 300 LB Duty Rating, Quick Latch, Safety Rung Lock, Mar-Resistant End Caps, Swivel Safety Shoes, D-Shaped Rungs, Meets OSHA, CSA, & ANSI Standards, Rope & Pulley, Modified I-Beam Construction.

  • Manufacturer: Bosch Power Tools
  • Model Number: 11245evs

SDS-max® bit system — tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Variable-speed dial — for accurate bit starting and controlled chipping applications
Constant Response™ Circuitry — Provides soft-start, maintains constant speed under load, provides overload protection

Service Minder™ light — indicates when preventative maintenance is required
Vario-Lock ™ positioning — rotates and locks chisel into 12 different positions to optimize working angle

Padded rear handle — absorbs shock for operator comfort
Integral clutch — helps minimize torque reaction
360° Auxiliary handle — provides a wide range of movement along with operator comfort
Double insulated, UL listed, complies to OSHA

  • Manufacturer: IHI
  • Model Number: 55NX

The 55NX is an 12,498 lb zero tail swing mini excavator with a digging depth of 12’5” and a digging force of 10,850 lbs. Standard equipment include a Yanmar 37.1 HP engine, 4 post canopy, Bridgestone Tough Tracks, auxiliary hydraulic piping, pattern change valve, suspension seat, arm rest, and backfill blade.

  • Manufacturer: IHI
  • Model Number: 40VX-3

The 40VX-3 mini excavator has the largest operator's space in its class and its clean engine is compliant for StageIIIA and EPA interim Tier4.  This mini excavator is a 10,206 lb zero tail swing unit with a digging depth of 11’10” and a digging force of 9,854 lbs. Standard equipment include a Yanmar 37.1 HP engine, 4 post canopy, rubber tracks, auxiliary hydraulic piping, pattern change valve, suspension seat, arm rest, and backfill blade.

 

  • Manufacturer: Bosch Power Tools
  • Model Number: 11247

10 Amp, 120V Rotary Hammer