Product Catalog

  • SKU: 403975
  • Model Number: AE2240

40', Aluminum, Type IA, Extension Ladder, 300 LB Duty Rating, Quick Latch, Safety Rung Lock, Mar-Resistant End Caps, Swivel Safety Shoes, D-Shaped Rungs, Meets OSHA, CSA, & ANSI Standards, Rope & Pulley, Modified I-Beam Construction.

  • Manufacturer: Bosch Power Tools
  • Model Number: 11245evs

SDS-max® bit system — tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Variable-speed dial — for accurate bit starting and controlled chipping applications
Constant Response™ Circuitry — Provides soft-start, maintains constant speed under load, provides overload protection

Service Minder™ light — indicates when preventative maintenance is required
Vario-Lock ™ positioning — rotates and locks chisel into 12 different positions to optimize working angle

Padded rear handle — absorbs shock for operator comfort
Integral clutch — helps minimize torque reaction
360° Auxiliary handle — provides a wide range of movement along with operator comfort
Double insulated, UL listed, complies to OSHA

  • Manufacturer: EDCO
  • Model Number: DS-18-13H

Concrete & Asphalt walk-behind Saws are available in sizes 16"and 18" blade capacity to assist you in completing any of your cutting needs.

 

  • Manufacturer: IHI
  • Model Number: 55NX

The 55NX is an 12,498 lb zero tail swing mini excavator with a digging depth of 12’5” and a digging force of 10,850 lbs. Standard equipment include a Yanmar 37.1 HP engine, 4 post canopy, Bridgestone Tough Tracks, auxiliary hydraulic piping, pattern change valve, suspension seat, arm rest, and backfill blade.

  • Manufacturer: IHI
  • Model Number: 40VX-3

The 40VX-3 mini excavator has the largest operator's space in its class and its clean engine is compliant for StageIIIA and EPA interim Tier4.  This mini excavator is a 10,206 lb zero tail swing unit with a digging depth of 11’10” and a digging force of 9,854 lbs. Standard equipment include a Yanmar 37.1 HP engine, 4 post canopy, rubber tracks, auxiliary hydraulic piping, pattern change valve, suspension seat, arm rest, and backfill blade.

 

  • Manufacturer: RuffWear
  • Model Number: TP56

Install hidden pet fence, low voltage lighting, control wires and more all in one operation. The E-Z Cable Installer digs a trench, lays a wire or cable and actually backfills the trench. With a simple modification it can be equipped to install drip tubing.

  • Manufacturer: Bosch Power Tools
  • Model Number: 11247

10 Amp, 120V Rotary Hammer

  • Manufacturer: Bosch Power Tools
  • Model Number: 11316EVS

14 Amp., 120V Demolition Hammer

  • Manufacturer: General Pipe Cleaners
  • Model Number: 100DH

Made from non-kinkable, high carbon, oil tempered steel. Equipped with aluminum grip handle and steel spear head.

  • Manufacturer: DeWalt Tools
  • Model Number: DW292

The DEWALT 1/2 in. (13mm) Impact Wrench with Detent Pin Anvil delivers 345 ft-lbs of torque in forward and reverse. The Ball Bearing Construction provides increased durability. The soft grip handle design allows for increased comfort while engaging the tool. This tool is ideal for the following applications – garage door installation, attaching ledger boards for deck building and guard rail assembly and disassembly.

  • Manufacturer: EDIC
  • Model Number: Saturn 17L33-BK




No job is too tough for this rugged series of floor machines from EDIC. With its all-metal construction and steel planetary gear boxes, the Saturn™ can stand up to the heaviest workloads, yet the ride is surprisingly smooth and quiet. The low speed models are built specifically to handle the stress associated with stripping and scrubbing hard floor surfaces as well as bonnet cleaning and shampooing carpets. Features like the quick and easy handle adjustment, anti-fatigue design, and the exclusive "lockout lever" for safe two-handed start up make this machine operator friendly and a winner in every commercial setting.

  • Model Number: BlueStreak Rip31

Specifically designed for the rental industry that needs all the features of quick clean off, height adjustability, lifting power and durability for all terrains. Designed for use on grass because of its unique "wrap around" design that prevents debris from being wiped off by long grass or weeds. The debris simply snaps around on to the back of the sweeper.

  • Model Number: Rex 89217

The Close Quarters Tool crimps rings to ASTM F-1087 on 3/8", 1/2", 3/4", and 1" pipe. A wrench is used to torque the bolts down until the gap is eliminated. Convenient 1" and 3/4" on one side, flip over and 1/2" and 3/8" on the reverse. Complete with a gauge to assure crimps are to specifications.

  • Model Number: Rex 89206

Wheeler-Rex introduces a line of crimping tools specifically designed to help install better connections on PEX potable water or radiant heating systems. The full circle crimp eliminates the unsightly appearance of tool marks and distortion of crimped rings. A Combination Pex Ring Crimper for ½" and ¾". Crimps conform to ASTM specifications and is supplied with a go / no-go gauge. Complete with a soft, comfortable grip and long handles for extra leverage.

  • Model Number: Rex 89204

Wheeler-Rex introduces a line of crimping tools specifically designed to help install better connections on PEX potable water or radiant heating systems. The full circle crimp eliminates the unsightly appearance of tool marks and distortion of crimped rings. A PEX Ring Crimper for 1". Crimps conform to ASTM specifications and is supplied with a go/ no-go gauge. Complete with a soft, comfortable grip and long handles for extra leverage.

  • Manufacturer: Powernail
  • Model Number: 100

PowerJacks are designed to push tongue & groove flooring strips into place and hold them tightly for hands-free nailing. Powerjacks will work on almost any thickness flooring without damaging the flooring surface. They can be used next to the wall, at stud locations or anywhere else on the floor.

  • Manufacturer: Powernail
  • Model Number: 45R

The Model 45R is ratcheting version of the Model 45 nailer which is easier use and requires less effort to drive the nail. Using a ratcheting, multi-blow nailer allows the user to strike multiple times while driving the nail at the perfect 45 degree angle and countersinking the nail as well.

  • Manufacturer: Powernail
  • Model Number: 445FS

The Powernail Model 445FS is a mallet-actuated, pneumatic stapler and uses the same proven design that has made our nailers the standard of the commercial flooring industry for over 60 years.

  • Manufacturer: Powernail
  • Model Number: 445LS

The Powernail Model 445FS is a mallet-actuated, pneumatic nailer and uses the same proven design that has made our nailers the standard of the commercial flooring industry for over 60 years.

  • Model Number: MM60

Designed with performance and durability in mind. Features dependable Honda Engines

  • Manufacturer: MBW
  • Model Number: CM6

MBW Concrete Mixers are ruggedly built and take the punishment of this demanding application. Heavy-duty frame, drum yoke and drum assemblies are long-wearing and matched to anticipated stresses and loads. High quality cast iron pinion and gear rings provide long life and heavy-duty shroud opens to provide easy access to interior engine compartment. MBW concrete mixers are powered by reliable Honda engines with exterior "Shut Down" button for instant stopping of the mixer. This unit is well balanced and feature spring mounted axle assemblies for easy, stable towing.

  • Model Number: BN DBC-16H

This portable combination tool provides jobsite cutting and bending of rebar (reinforcing steel) all in one tool. The unique design of this combination unit provides the operator the ability to cut and bend rebar for in-place rebar or stationary fabrication applications. Now you have the ability to cut and bend rebar protruding from a wall or column or just fabricate what you need on a table. Our powerful electric/hydraulic design is for heavy-duty #5 (16 mm) grade 60 rebar cutting and bending. Our competitions’ electric/mechanical design is a medium-duty tool. Our in-place rebar forming ability and heavy-duty rating are features the competitors just can not match. It’s fast and easy to use, there is no changing of attachments, bends rebar up to 180 degrees. This tool was built with the quality & reliability you would expect from Benner-Nawman. This tool was named as one of the most innovative products at the 2008 World of Concrete Exposition and will save you time a

  • Model Number: BN MBC-16B

Bends and Cuts with Less Effort!
Longer handle and cam mechanism provides greater leverage when cutting and bending grade 60 rebar
Adjustable 2-1/2” (63.5mm) diameter bending roller
Replaceable cutting jaws have two open slots with innovative shaped blades to prevent chipping of the jaws
Sturdy frame design is firmly mounted on a 2” x 8” x 60” wooden board ready to use
Other features include a comfortable 12” long no-slip handle grip and a lifting chain & ring to make it easier to carry to and from the job site

  • Model Number: CAL 1PFHL48

Top guard designed to provide load visibility.
Adjustable fork widths from 6 ½”to 44 3/4”.
Frame size 45 ½”W x 38 ½”H.
Double rail lockdown for improved safety.
Step for easy machine entry.