Product Catalog

  • Manufacturer: Bosch Power Tools
  • Model Number: 11245evs

SDS-max® bit system — tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Variable-speed dial — for accurate bit starting and controlled chipping applications
Constant Response™ Circuitry — Provides soft-start, maintains constant speed under load, provides overload protection

Service Minder™ light — indicates when preventative maintenance is required
Vario-Lock ™ positioning — rotates and locks chisel into 12 different positions to optimize working angle

Padded rear handle — absorbs shock for operator comfort
Integral clutch — helps minimize torque reaction
360° Auxiliary handle — provides a wide range of movement along with operator comfort
Double insulated, UL listed, complies to OSHA

  • Manufacturer: EDCO
  • Model Number: DS-18-13H

Concrete & Asphalt walk-behind Saws are available in sizes 16"and 18" blade capacity to assist you in completing any of your cutting needs.

 

  • Manufacturer: Bosch Power Tools
  • Model Number: 11247

10 Amp, 120V Rotary Hammer

  • Manufacturer: Bosch Power Tools
  • Model Number: 11316EVS

14 Amp., 120V Demolition Hammer

  • Model Number: MM60

Designed with performance and durability in mind. Features dependable Honda Engines

  • Manufacturer: MBW
  • Model Number: CM6

MBW Concrete Mixers are ruggedly built and take the punishment of this demanding application. Heavy-duty frame, drum yoke and drum assemblies are long-wearing and matched to anticipated stresses and loads. High quality cast iron pinion and gear rings provide long life and heavy-duty shroud opens to provide easy access to interior engine compartment. MBW concrete mixers are powered by reliable Honda engines with exterior "Shut Down" button for instant stopping of the mixer. This unit is well balanced and feature spring mounted axle assemblies for easy, stable towing.

  • Manufacturer: Wyco
  • Model Number: 992

Wyco Tool’s high-efficiency motor operates at less than 65% of full load capacity under normal job conditions.

  • Manufacturer: Husqvarna
  • Model Number: K960

The new Husqvarna K 960 is our latest and most powerful handheld power cutter, featuring the revolutionary X-Torq® engine technology. It is a unique machine, in a class of its own when it comes to emission levels, efficiency and manoeuvrability.
DEX - The new Dust Extinguisher System that gives cleaner cutting with less water usage and slurry.
X-Torq® - Engine with X-Torq® produces 75 % less emissions, 20 % lower fuel consumption and more power.
Active Air Filtration - Centrifugal air cleaning in three stages, increases product life and extends service intervals.
SmartCarb™ - Built-in automatic filter compensation, maintains high power and lowers fuel consumption.
DuraStarter™ -Patented dust-sealed starter attachment, where the return spring and the pulley bearing are sealed.
EasyStart - Ensures 50% easier starting by reducing the compression in the cylinder during starting.
Wet cutting kit - All our cutters feature our

  • Manufacturer: Husqvarna
  • Model Number: K1250

When it comes to handheld gas-driven cutters for demanding jobs, with blades up to 16" and cutting depths up to 5.7", our largest model, the Husqvarna K 1250, is in a class of its own. Despite a large and powerful engine, this brawny, full-size machine is surprisingly easy to operate. The Husqvarna K 1250, with an impressive 5.8 kW output, is the market’s most powerful cutter, and can easily drive 16" blades.
DEX - The new Dust Extinguisher System that gives cleaner cutting with less water usage and slurry.
EasyStart - Ensures 50% easier starting by reducing the compression in the cylinder during starting.
Wet cutting kit - All our cutters feature our robust wet cutting kit, with low water usage.
Active Air Filtration - centrifugal air cleaning in three stages, increases product life and extends service intervals.
SmartCarb™ - Built-in automatic filter compensation, maintains high power and lowers fuel consumption.


  • Manufacturer: EDCO
  • Model Number: TP400

FAST, ECONOMIC, EASY DUST-FREE & PRECISE
•Can be plugged into regualr 20AMP outlet
•Designed for wet cutting concrete and masonry
•Equipped with the most powerful motor in the electric hand-held saw industry
•No hydraulic hoses and fluids to deal with, no exhaust fumes and gasoline to deal with

Equipped with the CARDI Smart Protection System
•Soft Start Motor - ensures smooth and safe start
•Mechanical Clutch - protects operator when jamming
•Electronic Clutch - protects motor and operator in case of overload

  • Model Number: B436

Honda 5.5HP GX160 Engine

Combination Blades Standard

  • Manufacturer: Virginia Abrasives
  • SKU: 515066
  • Model Number: 426-20205

Cupstones Flaring 5 x 2 x 5/8

  • Manufacturer: Bon Tool
  • Model Number: 12-169

Swaged Handle aids in the ability to work with concrete tools by allowing the user control and length of various tools

  • Manufacturer: American Pneumatic Tool
  • Model Number: 5239

APT's Model 190, (90 lb. class), Paving Breaker is tough and dependable; the high performance Model 190 is the most powerful air tool APT makes. It is designed for big jobs such as heavy demolition and concrete breaking. Since the Model 190 has the ability to penetrate the hardest concrete it is the tool of choice for road building and foundation removal

  • Manufacturer: American Pneumatic Tool
  • Model Number: 17923

APT's Model 140, (40 lb. class), is a rugged, yet lightweight Paving Breaker designed for light to medium construction work. It is ideally suited for plant maintenance work, such as light demolition of floors, pavement, frozen ground and masonry walls. This tool is also very popular for bridge deck jobs