The D1532-2 aluminum extension ladders have a duty rating of 300 pounds and have extra heavy duty I-beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring-loaded locks operate smoothly. Mar-resistant end caps protect the surface ladder is resting against.
The 560-3 is a 3 section, 60' Aluminum Extension Ladder that has a duty rating of 250 pounds. The exclusive ALFLO® rung joint means TWIST-PROOF® performance. The top fly section can be removed and used separately as a single straight ladder. The bottom base section and intermediate section can be used as a 40' extension ladder. Shoes pivot for use on hard or penetrable surfaces. Rugged spring-loaded locks operate smoothly. Heavy duty rope and double pulley system lift fly and intermediate sections. Rugged spring-loaded locks operate smoothly.
Ideal for muddy water, high solid content.
Handles 1 1/2” solids.
Maximum lift of 20 feet
Powered by a Honda GX160 4HP gasoline engine.
Enclosed gears with oil bath lubrication.
Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles for easy lifting · 10-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug
Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection
Motor: Heavy-duty, high quality cast aluminum enclosed electric motor
Components: Built-in temperature control thermostat with control dial and digital temperature read-out · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-o
Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank · Powder coated steel handles for easy lifting · 10-inch pneumatic tires · Spare parts storage system (located on back of unit) · Fuel drain plug
Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection
Motor: Heavy-duty, high quality cast aluminum enclosed electric motor
Components: Built-in temperature control thermostat with control dial and digital temperature read-out · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor · Error indicator read-o
Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank
Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection
Motor: Heavy-duty, high quality cast aluminum enclosed electric motor
Components: Built-in temperature control thermostat with control dial · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor
Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel
For use in workshops, garages, construction sites and farms with proper ventilation.
40', Aluminum, Type IA, Extension Ladder, 300 LB Duty Rating, Quick Latch, Safety Rung Lock, Mar-Resistant End Caps, Swivel Safety Shoes, D-Shaped Rungs, Meets OSHA, CSA, & ANSI Standards, Rope & Pulley, Modified I-Beam Construction.
SDS-max® bit system — tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Variable-speed dial — for accurate bit starting and controlled chipping applications
Constant Response™ Circuitry — Provides soft-start, maintains constant speed under load, provides overload protection
Service Minder™ light — indicates when preventative maintenance is required
Vario-Lock ™ positioning — rotates and locks chisel into 12 different positions to optimize working angle
Padded rear handle — absorbs shock for operator comfort
Integral clutch — helps minimize torque reaction
360° Auxiliary handle — provides a wide range of movement along with operator comfort
Double insulated, UL listed, complies to OSHA
Concrete & Asphalt walk-behind Saws are available in sizes 16"and 18" blade capacity to assist you in completing any of your cutting needs.
Install hidden pet fence, low voltage lighting, control wires and more all in one operation. The E-Z Cable Installer digs a trench, lays a wire or cable and actually backfills the trench. With a simple modification it can be equipped to install drip tubing.
Made from non-kinkable, high carbon, oil tempered steel. Equipped with aluminum grip handle and steel spear head.
The DEWALT 1/2 in. (13mm) Impact Wrench with Detent Pin Anvil delivers 345 ft-lbs of torque in forward and reverse. The Ball Bearing Construction provides increased durability. The soft grip handle design allows for increased comfort while engaging the tool. This tool is ideal for the following applications – garage door installation, attaching ledger boards for deck building and guard rail assembly and disassembly.
No job is too tough for this rugged series of floor machines from EDIC. With its all-metal construction and steel planetary gear boxes, the Saturn™ can stand up to the heaviest workloads, yet the ride is surprisingly smooth and quiet. The low speed models are built specifically to handle the stress associated with stripping and scrubbing hard floor surfaces as well as bonnet cleaning and shampooing carpets. Features like the quick and easy handle adjustment, anti-fatigue design, and the exclusive "lockout lever" for safe two-handed start up make this machine operator friendly and a winner in every commercial setting.
Specifically designed for the rental industry that needs all the features of quick clean off, height adjustability, lifting power and durability for all terrains. Designed for use on grass because of its unique "wrap around" design that prevents debris from being wiped off by long grass or weeds. The debris simply snaps around on to the back of the sweeper.
The Close Quarters Tool crimps rings to ASTM F-1087 on 3/8", 1/2", 3/4", and 1" pipe. A wrench is used to torque the bolts down until the gap is eliminated. Convenient 1" and 3/4" on one side, flip over and 1/2" and 3/8" on the reverse. Complete with a gauge to assure crimps are to specifications.
Wheeler-Rex introduces a line of crimping tools specifically designed to help install better connections on PEX potable water or radiant heating systems. The full circle crimp eliminates the unsightly appearance of tool marks and distortion of crimped rings. A Combination Pex Ring Crimper for ½" and ¾". Crimps conform to ASTM specifications and is supplied with a go / no-go gauge. Complete with a soft, comfortable grip and long handles for extra leverage.
Wheeler-Rex introduces a line of crimping tools specifically designed to help install better connections on PEX potable water or radiant heating systems. The full circle crimp eliminates the unsightly appearance of tool marks and distortion of crimped rings. A PEX Ring Crimper for 1". Crimps conform to ASTM specifications and is supplied with a go/ no-go gauge. Complete with a soft, comfortable grip and long handles for extra leverage.
PowerJacks are designed to push tongue & groove flooring strips into place and hold them tightly for hands-free nailing. Powerjacks will work on almost any thickness flooring without damaging the flooring surface. They can be used next to the wall, at stud locations or anywhere else on the floor.
The Powernail Model 445FS is a mallet-actuated, pneumatic stapler and uses the same proven design that has made our nailers the standard of the commercial flooring industry for over 60 years.
The Powernail Model 445FS is a mallet-actuated, pneumatic nailer and uses the same proven design that has made our nailers the standard of the commercial flooring industry for over 60 years.
