The Stihl TS 800 can cut asphalt or concrete to a depth of 5¾". It can also cut rebar, solid metal, and duct. The saw can be fitted with any size of wheel up to 16" diameter, a steel diamond blade or a disposable. The TS 800 is a powerful saw that starts and runs well over short or extended periods, and it’s light and easy to handle. This ergonomically-designed hand-held saw can do many of the jobs done by a walk-behind saw, without the inconvenience of the much bigger machine. The arbor size of the TS 800 is 20mm, but with a bushing any 25mm (1") blade can easily be fitted to the machine.
SDS-max® bit system — tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Variable-speed dial — for accurate bit starting and controlled chipping applications
Constant Response™ Circuitry — Provides soft-start, maintains constant speed under load, provides overload protection
Service Minder™ light — indicates when preventative maintenance is required
Vario-Lock ™ positioning — rotates and locks chisel into 12 different positions to optimize working angle
Padded rear handle — absorbs shock for operator comfort
Integral clutch — helps minimize torque reaction
360° Auxiliary handle — provides a wide range of movement along with operator comfort
Double insulated, UL listed, complies to OSHA
Concrete & Asphalt walk-behind Saws are available in sizes 16"and 18" blade capacity to assist you in completing any of your cutting needs.
Designed with performance and durability in mind. Features dependable Honda Engines
MBW Concrete Mixers are ruggedly built and take the punishment of this demanding application. Heavy-duty frame, drum yoke and drum assemblies are long-wearing and matched to anticipated stresses and loads. High quality cast iron pinion and gear rings provide long life and heavy-duty shroud opens to provide easy access to interior engine compartment. MBW concrete mixers are powered by reliable Honda engines with exterior "Shut Down" button for instant stopping of the mixer. This unit is well balanced and feature spring mounted axle assemblies for easy, stable towing.
Wyco Tool’s high-efficiency motor operates at less than 65% of full load capacity under normal job conditions.
The new Husqvarna K 960 is our latest and most powerful handheld power cutter, featuring the revolutionary X-Torq® engine technology. It is a unique machine, in a class of its own when it comes to emission levels, efficiency and manoeuvrability.
DEX - The new Dust Extinguisher System that gives cleaner cutting with less water usage and slurry.
X-Torq® - Engine with X-Torq® produces 75 % less emissions, 20 % lower fuel consumption and more power.
Active Air Filtration - Centrifugal air cleaning in three stages, increases product life and extends service intervals.
SmartCarb™ - Built-in automatic filter compensation, maintains high power and lowers fuel consumption.
DuraStarter™ -Patented dust-sealed starter attachment, where the return spring and the pulley bearing are sealed.
EasyStart - Ensures 50% easier starting by reducing the compression in the cylinder during starting.
Wet cutting kit - All our cutters feature our
When it comes to handheld gas-driven cutters for demanding jobs, with blades up to 16" and cutting depths up to 5.7", our largest model, the Husqvarna K 1250, is in a class of its own. Despite a large and powerful engine, this brawny, full-size machine is surprisingly easy to operate. The Husqvarna K 1250, with an impressive 5.8 kW output, is the market’s most powerful cutter, and can easily drive 16" blades.
DEX - The new Dust Extinguisher System that gives cleaner cutting with less water usage and slurry.
EasyStart - Ensures 50% easier starting by reducing the compression in the cylinder during starting.
Wet cutting kit - All our cutters feature our robust wet cutting kit, with low water usage.
Active Air Filtration - centrifugal air cleaning in three stages, increases product life and extends service intervals.
SmartCarb™ - Built-in automatic filter compensation, maintains high power and lowers fuel consumption.
Swaged Handle aids in the ability to work with concrete tools by allowing the user control and length of various tools
APT's Model 190, (90 lb. class), Paving Breaker is tough and dependable; the high performance Model 190 is the most powerful air tool APT makes. It is designed for big jobs such as heavy demolition and concrete breaking. Since the Model 190 has the ability to penetrate the hardest concrete it is the tool of choice for road building and foundation removal
APT's Model 140, (40 lb. class), is a rugged, yet lightweight Paving Breaker designed for light to medium construction work. It is ideally suited for plant maintenance work, such as light demolition of floors, pavement, frozen ground and masonry walls. This tool is also very popular for bridge deck jobs
