Product Catalog

  • Model Number: NSM-62011

5/8" inch submersible utility pump, top discharge

  • Model Number: TJ-2000C

JET 1-Ton Capacity TRANSMISSION JACK -- Designed for the removal and installation of auto and light truck transmissions or transfer cases. Wide stance steel frame features reinforced steel side plates that double as tool trays. Heavy-duty steel ball bearing swivel casters. Fully adjustable saddle, corner brackets and safety chains. "Quick" Lift hydraulic pump for rapid lifting to contact point without load. Safety overload and top-of-stroke bypass system provides maximum pump protection. Pump handle swivels 360° for operation in any position. Proof tested and certified. Complies with ANSI/ASME PALD-2 standards.

  • Model Number: PT-2748J

JET 27" x 48" Forks, 5000-LB Capacity PALLET TRUCK -- High-quality welded steel construction with a durable powder coat finish 2-1/2" low profile design for smaller size pallet openings. Easy-to-use with single hand operation, fingertip controls and 180 degree turning radius. Extra wide poly-over-steel steer wheels provide a smooth, quiet ride with added traction and stability. Wheel bearings are double sealed and lifetime lubricated. When purchased through the True Value warehouse, this pallet truck is assembled. Otherwise, some assembly is required. See True Value # 724565

  • Manufacturer: Jet
  • Model Number: 453335K

JET 35-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards

  • Manufacturer: Jet
  • Model Number: 453323K

JET 22-1/2L-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards

  • Manufacturer: Jet
  • Model Number: 453313K

JET 12-1/2L-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards

  • Manufacturer: Hilti
  • Model Number: 305179

Powder-Actuated Tool DX 460, the ultimate solution for fastening materials from drywall track to 2x4s, as well as suspended ceiling applications, into concrete and steel.

Fully automatic cartridge advance and piston return system gives you a higher fastening rate without manually cycling the tool

Magazine allows for increased productivity using collated strips of 10 .27 caliber cartridges
Narrow-access baseplate for single fastening applications using fasteners with pre-mounted steel washers

Easy to take apart and clean by hand
Fastener range 1/2" to 2 7/8". Hilti .27 caliber shot in plastic strips of 10. Fully automatic

  • Manufacturer: Genie
  • Model Number: SLC24

SLC24 Superlift

  • Manufacturer: General Wire Spring
  • Model Number: X500

Spin Drive Less Snake with Open Drum with 1/2" x 50' cable

  • Manufacturer: General Wire Spring
  • Model Number: I-3FL

3ft Flex. Closet Auger.

  • Manufacturer: General Wire Spring
  • Model Number: ER-E

Easy Rooter with 5-8in x 100ft cable

  • Manufacturer: General Wire Spring
  • Model Number: EJ-B

Easy Rooter Jr with 75ft cable

  • Manufacturer: Essex Silver Line
  • Model Number: SL7

7" Floor edger runs at 3600 RPM is powerful enough for the toughest job and finishes beautifully

  • Model Number: SL8

The SL8 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer to achieve professional results!

  • Manufacturer: EDIC
  • Model Number: 3004AD

Exclusive hi-tech design makes it the most versatile, compact and portable air mover in the industry. Heavy-duty polyethylene housing with "granite" look is durable and never looks dirty. Balanced carry-along handle distributes weight evenly for superior portability. Easy to store or stack for transport. Thermally protected motor

Portable Texture Unit is a continous air compressor unit used to provide air flow for the Gun & Hopper. Used to spray drywall mud, texture paints, acoustics, glitter or waterproofing

  • Manufacturer: Porta-Nails, Inc.
  • Model Number: 24-304

Door Jamb Saw Kit is a tool designed for the undercutting of jambs, doors, and walls to allow for various types of flooring

  • Manufacturer: Bon Tool

JR Power Stretcher Kit is for stretching and flatteneing of carpet

  • Manufacturer: Bon Tool
  • SKU: 515925
  • Model Number: 24-217

Heat Seal Tape is the tape used to glue carpet down

  • Manufacturer: Bon Tool

Heat Iron melts glue for carpet to adhere to

  • Manufacturer: Bon Tool

Knee Kicker is for stretching and flattening of carpet

  • Manufacturer: Bon Tool

9/16" Carpet Stapler is for placing staples in carpet

Floor Tile Cutter cuts various sizes and shapes of VCT tile

  • Manufacturer: Bon Tool

Linoleum Roller is a tool used to flatten, smooth and apply weight when installing adhesive backed linoleum

  • Manufacturer: Bon Tool
  • Model Number: 13-252

Hydra Sponge is a sponge used for smoothing and adding water to concrete